Cut to the best solution Product DescriptionApplicationsDownload Data SheetProduct Description ACE™ is an easy-to-use explosive cutting system with a flexible shaped charge liner and optimized standoff. The improved ACETM is the highest level of Advanced Cutting Explosive offered by Ensign-Bickford Aerospace & Defense Company. The relative shock insensitivity of the explosive minimizes accidental or inadvertent

Anti-personnel Obstacle Breaching System DescriptionDownload Data SheetDescription The Anti-personnel Obstacle Breaching System (APOBS) is an explosive line charge system designed to clear breaching lanes through complex antipersonnel obstacles (anti-personnel mines and wire obstacles) from a safe standoff position. This two man portable system is hand emplaced and enables dismounted soldiers to rapidly clear a footpath

Product DescriptionProduct Description The Arm Disarm (AD) Switch is an electro-mechanical safety device that provides reliable safing and arming of an ordnance system by breaking the electrical path between source and an initiator element. Its function is similar to that of a Safe and Arm Device; however, it does not contain an explosive train. The

Product DescriptionProduct Description Arm/Fire Device (AFD) Arm/Fire Devices (AFD) are commonly used on missile programs to provide safe initiation of solid rocket motors. AFDs are rotating mechanism that move electric detonators in-line (ARM) and out-of-line (SAFE) with downstream ordnance, preventing inadvertent rocket motor ignition while in the SAFE position and assuring reliable initiation when in

Terminate any mission DescriptionDescription Precise construction for various applications Adjust the different missions of your destruct charges easily and efficiently for cost-effectiveness and inventory control. You can achieve flight termination for any missile application, including space, strategic, or tactical by simply tailoring a destruct charge for your specific needs. From the hermetically sealed aluminum skin

Small yet powerful Product DescriptionApplicationsDownload Data SheetProduct Description The CSFD is a is a compact, non-electric, shock tube assembly with an attached striker firing device and military strength detonator. The shock tube is coiled and wrapped in a “skin,” for reduced weight and easy deployment. The CSFD was designed to combine the compact design of

Reliable. Technically Smart. Product DescriptionProduct Description For use in Flight Termination Destruct Charge, the design of the Conical Shaped Charge is simple and technically sound. EBAD has proven that PBXN is an excellent explosive material to use both for initiation reliability and cutting jet performance.  Detonation of either, or both, FCDCA will initiate the PBXN

Design that sets the standard Product DescriptionProduct Description Cord Cutter EBAD is the global leader in ordnance and pyrotechnic devices for the launch vehicle, missile, and spacecraft markets. Pyrotechnic Cutters are devices for the severance of rods, tubes, cables, bolts or other hold downs. Actuation of the device is by electrical signal and it is

A staple of military demolition DescriptionFeaturesDownload Data SheetDescription M112 Demolition Block The M112 Demolition Block is a staple of military demolition. It consists of 1.25 pounds of composition C-4, pressed into a rectangular block and packaged in a compact, easy to handle, easy to transport, shrink-wrapped, plastic envelope. Principal of Operation The M112 Demolition Block can

An explosive need. A dynamic answer. DescriptionFeaturesDownload Data SheetDescription M118 Demolition Block The M118 Demolition Block is one of the most versatile explosive charges available. It consists of four sheets of 0.5 pound (0.23 kg) PETN-based PRIMASHEET® 1000 (DETASHEET® Flexible Explosive) Flexible Sheet Explosive qualified to MIL-PRF-46676 and packaged in a compact, easy to transport

Reliable Flight Termination Product DescriptionProduct Description Bulk Destruct Charge Assemblies (DCAs) A Destruct Charge Assembly (DCA) is an explosive charge used in a Flight Termination System (FTS) to render a missile or launch vehicle non-propulsive and non-aerodynamic. EBAD has designed, qualified, and manufactured Destruct Charge Assemblies for more than 50 years and has a large

EBAD takes the initiative across the spectrum. Product DescriptionProduct Description Detonation Booster Assembly (DBA) EBADs Detonation Booster Assemblies (DBAs) are the US launch vehicle and space industry’s standard devices. DBAs are commonly used on missiles, launch vehicles, spacecraft and other aerospace and defense platforms to transition the pyrotechnic output of an Electric Initiator (such as

Little things can make a big difference Product DescriptionProduct Description Detonation Signal Interrupter The seemingly simple concept of safing and arming is critical to control any explosive train. EBAD interrupters are used in systems where a mechanical barrier is required to preclude inadvertent initiation of a mission critical explosive function. A successful ordnance starts with

Pyrotechnic devices for the launch vehicle and spacecraft markets Product DescriptionProduct Description Dual Cartridge Cutter EBAD is the global leader in ordnance and pyrotechnic devices for the launch vehicle and spacecraft markets. Pyrotechnic Cutters are devices for the severance of rods, tubes, cables, bolts or other hold down mechanisms on launch vehicles or space craft.

Separation, in total control FCDCA Disconnect The familiar sight of a strategic missile or space launch disconnecting from its boosters is only possible via its dynamic disconnect components. Disconnects are ideally designed to ensure reliable energetic transfer with controlled transfer interface geometry that provides for separation during a staging event. Reliable by design EBAD disconnects

Ideal for systems that require a robust, high strength, flexible explosive transfer line Product DescriptionProduct Description Flexible Confined Detonating Cord Assembly (FCDCA) EBAD’s Flexible Confined Detonating Cord Assembly (FCDCA) is an explosive transfer line widely used on missile, launch vehicle, and manned space platforms for motor ignition, separation, and Flight Termination applications. EBAD has been

Instantaneous separation of flight vehicle structures Product DescriptionProduct Description Frangible Joint Assembly (FJA) A Frangible Joint Assembly is a unique explosive device that provides instantaneous separation of flight vehicle structures while maintaining complete confinement of explosive debris. The key components of a Frangible Joint include Mild Detonating Fuse (MDF), an explosive confinement tube, a separable

Unique and Precise DescriptionDescription Frangible Nut EBAD's Frangible Nut Assembly consists of a single metal structure and two explosive booster assemblies that are easily tailorable for size and input requirements. The single piece Frangible Nut is uniquely machined from Inconel to have a pre-defined separation plane. Four precision-machined webs hold the two halves of the

Predictable success DescriptionDescription Gas Generator Predictability is exactly what you want when it comes to separation safety. And you can rely on EBAD’s Gas Generators, a gas-producing pyrotechnic device, used for tactical missiles, gas turbine engines, launch vehicles, aircraft egress systems and ordnance dispensing systems, to deliver this confidence. Our device provides a compact energy

Designed for structure and confined space defeat DescriptionFeaturesDownload Data SheetDescription Overview HELIX™ High Energy Liquid Explosive is a powerful and versatile liquid explosive which eliminates the logistical difficulties usually encountered in shipping and storing high explosives. HELIX™ is sold as two components, the liquid and the activator, each of which can remain in long term

Reliably Activate HDRMS Product DescriptionProduct Description The Hold-down and Release Mechanism Firing Unit (HFU) is used to actuate NEA® Hold-down and Release Mechanisms (HDRMs) for the deployment of spacecraft. The HFU provides 20 primary and 20 redundant firing outputs based on capacitive discharge firing circuits designed to reliably activate HDRMs and maximize the simultaneity of

All the energy you need Product DescriptionProduct Description Electric Initiators are commonly used on missiles, launch vehicles, spacecraft, and other aerospace and defense platforms for the initiation of solid rocket motors and other propulsive elements, and actuation of mechanisms such as separation devices, cutters, pin pullers, or isolation valves. The Initiator takes an electrical input

Detonation on demand DescriptionDescription IED Demo Bar EBAD offers state-of-the-art technology with the Improvised Explosive Device (IED) Demo Bar. Designed for use with nearly all robots currently employed by EOD personnel, the bar accepts a 1000 ft (300m) Skin-Pack® Non-Electric Detonator. The mini shock tube is deployed from the Skin-Pack® and laid on the ground

Because reliable ignition should always be safe DescriptionDescription Ignition Safety Device (ISD) The Ignition Safety Device (ISD) is a fully electronic, in-line device for rocket motor ignition. Housed by stainless steel, the ISD works by accepting DC electrical input power and arm/fire signals, performing safety logic validation, and generating high voltage for ignition of a

Keeps the energy going. And going. DescriptionDescription Lanyard Pull Initiator The EBAD Lanyard Pull Initiator is composed of three major components: a firing mechanism, a delay cartridge and housing and serves several key functions. Most commonly used in a secondary function of initiating destruct charges after normal separation to preclude re-entry of live explosive components,

Close for comfort Product DescriptionFeaturesDownload Data SheetProduct Description Integral Firing Device (IFD) The Integral Firing Device (IFD) is an all-in-one, disposable shock tube firing system designed for close-quarter breaching applications. The IFD is available in single or dual shock tube configurations. The IFD eliminates the need to field-improvise a firing assembly by providing a quick

Truly intelligent solutions DescriptionDescription Intelligence Initiation System The WizOrd™ Intelligence Initiation System is an EBAD trademarked system known for its electronically addressable, low power ordnance initiation system that is ideally suited for applications that require multiple initiation events. This basic technology can become a dynamic system modified to meet a wide range of applications, configurations,

Rapid entry with low collateral damage DescriptionFeaturesDownload Data SheetDescription Overview The KRWS Breaching Rounds is a cast dense frangible breaching round with an energetic core that allows users to ballistically breach with smaller calibers, or improved performance over existing 12 gauge rounds. Operation The KRWS 9mm Breaching Round provides you the effects of a standard

Ordnance and pyrotechnic devices for the launch vehicle, missile, and spacecraft markets DescriptionDescription Lanyard Cutter EBAD is the global leader in ordnance and pyrotechnic devices for the launch vehicle, missile, and spacecraft markets. Pyrotechnic Cutters are devices used for the severance of rods, tubes, cables, wires, bolts or other hold down mechanisms. Actuation of the

Designed and qualified for the extreme environments of space Product DescriptionProduct Description Large Cutter EBAD is the global leader in ordnance and pyrotechnic devices for the launch vehicle, missile, and spacecraft markets. Pyrotechnic Cutters are devices for the severance of rods, tubes, cables, bolts or other hold downs. Actuation of the device is by redundant

EBAD’s Lead-in Lines can be custom manufactured on a for length, output, input, and packaging. Product DescriptionDownload Data SheetProduct Description EBAD’s Lead-in Lines can be custom manufactured on a for length, output, input, and packaging. Saving up to 40% on weight and volume with a less logistical footprint, EBAD’s Lead-in Lines are available in a

Unique performance for precision application Product DescriptionDownload Data SheetProduct Description EBAD is the manufacturer of Low Flammability LF-2 and LF-2XA explosive compositions, which are qualified and fielded in numerous US and international reactive armor products. EBAD’s LF-2 family of explosives is configured to match the complex reaction requirements of unique reactive armor applications while maintaining

Reliable, lightweight, efficient and low cost. Flash X-Ray Post-Function Product DescriptionProduct Description Linear Shaped Charge LSC is an explosive product that produces a cutting jet to sever a wide range of materials and applications such as cutting launch vehicle and missile skins for stage separation, rocket motor thrust termination, aircraft egress, breaching, Explosive Ordnance Disposal

Proven armor protection Product DescriptionDownload Data SheetProduct Description EBAD is the prime contractor for the M-19 Abrams Reactive Armor Tile system, ARAT-1. This state-of-the-art technology combines EBAD’s fully qualified insensitive energetic materials with passive elements for greatly increased armor protection. High safety, low maintenance Fully field by the US Army since 2006, the highly reliable

Low coreload detonating cord system with an attached blasting cap Product DescriptionDownload Data SheetProduct Description M151 & M152 Booster Assemblies are a low coreload detonating cord system with an attached blasting cap for a reliable signal transfer. Commonly used for daisy chaining and compatible with standard detonating cords, cap wells, munitions, and explosives. The boosters

Design that sets the standard Product DescriptionProduct Description Manifold Used in virtually all space launch vehicles, strategic missiles, tactical missiles and aircraft for reliable energetic signal transfer, EBAD manifolds connect energetic components with non-electric signal transfer systems. They ensure reliable transfer with controlled transfer interface geometry. All EBAD manifolds are uniquely designed to fully confine

Pre-made advanced breaching tool DescriptionFeaturesDownload Data SheetDescription Overview The Modular Stick Charge is a pre-made advanced breaching tool that incorporates the latest in new materials with 0.5 inch tamping gel, auxetic foam, PRIMASHEET®1000 explosive sheet, a SOB® Slip-On-Booster, and Detonating Cord into a revolutionary ready-made charge for explosive door breaching. The Modular Stick Charge has

The Freedom to Move. The Power to Survive. Product DescriptionDownload Data SheetProduct Description The MPLC® Tactical Line Charge is a lightweight, man portable line charge; rocket launched explosive line charge system that assists in breaching through a complex mined or trip-wired environment. The MPLC® Tactical Line Charge, NSN # 1375-01-593-8347, provides a precise, portable mine

It’s all in the follow-through Product DescriptionProduct Description EBAD's Multi Point Initiators (MPI’s) are very direct and effective. MPI’s offer flexibility in application and are commonly used in warhead initiation trains where they utilize one initiation output and translate it into many simultaneous outputs. Follows directions easily Offered in a variety shapes and sizes with

Electrically Initiated, One-Shot Switch DescriptionFeaturesAdvantagesDescription Overview EBAD, the global leader in non-pyrotechnic Hold Down & Release Mechanisms (HDRM) for the spacecraft market, brings this same highly reliable technology to battery protection applications with our complete line of Battery Cell Bypass Switches. Battery Cell Bypass Switches provide critical protection to battery assemblies in the event that

Reliable in-flight electrical disconnects DescriptionFeaturesAdvantagesDownload Data SheetDescription Overview EBAD’s Dead Face (DF) connectors are reliable in-flight electrical disconnects for satellite and spacecraft separation, missile staging, and umbilical separation. In addition to providing precision separation force, DF connectors provide electrical isolation prior to physical separation. Principle of Operation The EBAD NEA® DF electrical interconnects incorporate standard

Electrically Initiated, One-shot Release Mechanism DescriptionFeaturesAdvantagesLaunch LocksDescription Overview EBAD is the global leader in non-pyrotechnic Hold Down & Release Mechanisms (HDRM) for the spacecraft market. Hold Down & Release Mechanisms, also sometimes referred to as Separation Nut Release Mechanisms, are offered in a range of sizes with load capacities up to a 500 kN (112,000

Separation and Dispensing with Precision DescriptionFeaturesApplicationsDownload Data SheetDescription The NEA® Payload Release Module - PRM 9103 is designed to mount, hold, and release a spacecraft from the launch vehicle upper stage, or from another carrying spacecraft (OTV for instance). The PRM is designed to be used in a multi-point release system (i.e. 4 or 6

Low Shock and Positive Isolation with both Liquid and Gas Lines DescriptionFeaturesAdvantagesDescription Overview EBAD’s highly reliable Hold Down & Release Mechanisms technology has been adapted for use in Non-Pyrotechnic Valves. The electrically redundant valves offer low shock and positive isolation with both liquid and gas lines.  They are available in both normally closed and normally

Utilizes the flight-proven technology of the NEA® mechanism product line to release payloads from a launch vehicle DescriptionFeaturesDescription Overview For nearly 60 years EBAD has supplied launch vehicles and the space market hardware to support initiation and separation. The NEA® Payload Release Ring utilizes the flight-proven technology of the NEA mechanism product line to release

With Simplicity Comes Reliability DescriptionFeaturesAdvantagesLaunch LocksDescription Overview EBAD is the global leader in non-pyrotechnic Hold Down & Release Mechanisms (HDRM) for the spacecraft market.  Our patented split spool technology that has made our HDRMs the industry standard for non-pyrotechnic release mechanisms is also available in Pin Puller configurations. Principle of Operation EBAD Pin Pullers consist

Command Release. DescriptionDescription Umbilical Disconnect (UMB) EBAD’s Umbilical Disconnect (UMB) can be actuated by a lanyard, pyrotechnic device, or Non-Explosive Actuator (NEA).  They are also offered with a combination of the above if redundancy is required.  All UMB connectors have soft dock positioning and scoop proof design. Designed for your application. Our connectors are available

Electrically Initiated, One-shot Release Mechanism DescriptionFeaturesDownload Data SheetDescription Model ZSF and IFD Product Data Sheet EBAD’s Zero Separation Force (ZSF) and In-Flight Disconnects (IFD) connectors are reliable in-flight electrical disconnects for satellite and spacecraft separation, missile staging, and umbilical separation. Connector pairs are designed to provide precision zero, positive or negative separation force, eliminating the

Totally customized. Never compromised. Product DescriptionProduct Description Pin Puller EBAD specializes in entirely customizable solutions for our customers. We design a wide variety of Pin Puller Actuators for a range of requirements allowing customers to select specific stroke, thrust, and size without affecting firing characteristics. Our products can support a static load of up to

Light weight, heavy hitting DescriptionDescription Piston Actuator These powerful stroking devices are designed to pack a lot of punch!  Piston Actuators can be initiated electrically with a bridge wire device, or with an EBAD FCDCA.  Upon initiation, pressure is created causing a piston to stroke. These devices are designed to provide an impulse for a

Leading with better products Product DescriptionProduct Description The aerospace and defense industries continually rely on our extensive experience in the scale-up and production of Plastic Bonded Explosives (PBX). EBAD’s scientists and engineers offer leading edge development of Department of Defense (DOD), aerospace, commercial and specialty applications. Unique mechanical properties EBAD offers a wide range of

Pre-made Advanced Breaching Tool Product DescriptionFeaturesDownload Data SheetProduct Description The ACE™ Sliding Charge is a pre-made advanced breaching tool that incorporates ACE™ Cutting Charges, SOB® Slip-On-Boosters, and Detonating Cord into a ready-made charge for explosive door breaching. Each section of ACE™ has hydrogel tape for easy attachment to the target and the detonating cord slides

Designed to Defeat Locks Product DescriptionApplication & PropertiesDownload Data SheetProduct Description The ACE™ Strip Charge is a pre-made advanced breaching tool that incorporates ACE™ Cutting Charge, SOB® Slip-On-Booster, and Detonating Cord into a ready-made charge for explosive door breaching. The section of ACE™ has hydrogel tape for easy attachment to the target and a detonating

Reliable and Ready for Action Breacher Strip - Before Breacher Strip - After Product DescriptionApplicationDownload Data SheetProduct Description The Breacher Strip is a pre-made advanced breaching tool that incorporates PRIMASHEET® 1000 (DETASHEET® Flexible Explosive) explosive sheet, a SOB® Slip-On-Booster, and Detonating Cord into a ready-made charge for explosive door breaching. The strip has double sided tape

Ready-made charge for multiple targets Product DescriptionApplication & PropertiesDownload Data SheetProduct Description The Multi-Purpose Strip Charge is a pre-made advanced breaching tool that incorporates PRIMASHEET® 1000 (DETASHEET® Flexible Explosive) explosive sheet, a SOB® Slip-On-Booster, and Detonating Cord into a ready-made charge for explosive door breaching. The Multi-Purpose Charge contains a rubber strips that increases the

Pre-made advanced breaching tool Product DescriptionApplication & PropertiesDownload Data SheetProduct Description The Push Charge is a pre-made advanced breaching tool that incorporates PRIMASHEET® 1000 (DETASHEET® Flexible Explosive) explosive sheet and Detonating Cord into a ready-made charge for explosive door breaching. The Push Charge contains a rubber pad that increases the charge’s performance against push doors.

Designed for quick deployment. DescriptionFeaturesDownload Data SheetDescription The Scissor Charge is a pre-made advanced breaching tool that incorporates ACE® Cutting Charge, SOB® Slip-On-Boosters, and Detonating Cord into a ready-made charge for defeating cables, chains, and other similar targets. The charge has both hook-and-loop strips and straps for easy attachment around the target. The charge assembly

Always dependable Product DescriptionDownload Data SheetProduct Description EBAD is the proud premier supplier of PRIMACORD® Detonating Cord to the United States Department of Defense (DoD) and military users worldwide. Our capabilities include design, development, production, packaging and testing on a wide range of detonating cord products. PRIMACORD® is a universal high-explosive tool used for a

Flexibility for your charges Product DescriptionApplications & PropertiesDownload Data SheetProduct Description PRIMASHEET® Flexible Sheet Explosive has been developed to meet your breaching and demolition needs. We manufacture PRIMASHEET® 1000 (DETASHEET® Flexible Explosive), a PETN based sheet explosive, and Primasheet® 2000, an RDX based sheet explosive. PRIMASHEET® 2000 is equally as powerful as a C-4 explosive

Turn gas or liquid flow on or off quickly. DescriptionDescription Overview Pyrotechnic Valves, commonly known as Pyro Valves, are one-shot isolation valves used for on-off flow control of liquid or gasses in missile and space platforms. They are commonly used in propulsion systems, or purge systems and are compatible with many fluids. Normally Closed (NC)

Single man-portable, self-contained breaching system Product DescriptionFeaturesDownload Data SheetProduct Description Rapid Wall Breaching Kit (RWBK) The Rapid Wall Breaching Kit (RWBK) is a single man-portable, self-contained breaching system comprised of modular components. Four main parts of the system are the: Carrying Bag: made from a low-weight, long-lasting nylon with handles that allow for backpack use and

Isolates for Safety, Aligns for Power DescriptionDescription Overview Electromechanical Safe & Arms (S&A) are commonly used on launch vehicle, missile, and manned space platforms to provide initiation of safety critical energetic systems such as FTS destruct charges and solid rocket motors. S&As are rotating mechanisms that move detonators in-line (ARM) and out-of-line (SAFE) with downstream

Initiation of safety critical energetic systems Product DescriptionProduct Description Electronic Safe and Arm Devices (ESAD) Electronic Safe and Arm Devices (ESAD) are commonly used on missile and launch vehicle platforms to provide initiation of safety critical energetic systems such as FTS destruct charges, warheads, solid rocket motors, and other operational ordnance devices. ESADs are high

Product DescriptionProduct Description The FCDCA Signal Interrupter is a Safe & Arm devices that has a very simple theory of operation. In the safe position the two Explosive Leads (Boosters) are rotated out-of-line with their respective ordnance ports. A mechanical safing pin (key) prevents the device from moving from the out-of-line position (arming)—even if an

Designed for defeating structures DescriptionAdvantagesDownload Data SheetDescription Overview Satchel Charges are easy-to-use enhanced blast explosive devices designed for structure and confined space defeat utilizing blast overpressure and impulse effects. The MK179 MOD 0 (10 pound) and MK180 MOD 0 (5 pound) Satchel Charges offer very high level of blast overpressure and long impulse due to

Fast, Low Debris Separation Product DescriptionProduct Description EBAD is a leader in Separation Bolts for the launch vehicle and spacecraft market along with the associated initiators and pressure cartridges. The Separation Bolt uses work in the form of a pyrotechnic input to fracture the bolt, and cause separation at the pre-determined separation plane. EBAD produces

Low Shock, Debris-Free Separation Product DescriptionProduct Description EBAD is a leader in pyrotechnic Separation Nuts for the launch vehicle and spacecraft market along with the associated initiators and boosters. The Separation Nut uses work in the form of a pyrotechnic input to release a bolt, and cause separation. EBAD produces Separation Nuts ranging in size

Safer and Easier Non-Electrical Initiation Product DescriptionDownload Data SheetProduct Description Shock Tube Assemblies The Shock Tube Detonator is a linear signal transmission device designed to transmit an energetic signal through shock tube to a detonator. Shock tube is a hollow extruded tube containing a thin layer of energetic materials on its inner diameter. Once initiated,

DescriptionAdvantagesDownload Data SheetDescription Overview The Shock Tube Detonator is a linear signal transmission device designed to transmit an energetic signal through shock tube to a detonator. Shock tube is a hollow extruded tube containing a thin layer of energetic materials on its inner diameter. Once initiated, the shock tube transmits a signal to a detonating

Robust Shock Tube Detonator Assembly Product DescriptionFeaturesDownload Data SheetProduct Description The SKIN-PACK® is a robust shock tube detonator assembly with an integrated M81 firing device and a military strength detonator. The shock tube is precision coiled and encapsulated in a thermoplastic “skin,” eliminating the spool, reducing the overall weight of the unit and simplifying deployment.

There’s no such thing as overprotective Product DescriptionProduct Description EBAD understands the safety imperative of any warhead and has designed the Slow Cook-Off and Fast Cook-Off Sensors to act as protective mechanism, which responds selectively to specific thermal criteria, thereby minimizing any unintended violence by reaction or subsequent damage. A trigger temperature The thermal sensor

Giving your charge a boost DescriptionFeaturesDownload Data SheetDescription OverviewThe SOB® Slip-On-Booster is a flexible PETN-based explosive composition shaped into a cylinder. It is manufactured in 20-gram units and is used primarily for increasing output strength of a detonator, detonating cord, or a booster assembly. The SOB® is manufactured and can be certified in accordance with

Electrical Input, Pyrotechnic Output DescriptionDescription Space Electric Initiators Electric Initiators are commonly used on missiles, launch vehicles, spacecraft, and other aerospace and defense platforms for the initiation of solid rocket motors and other propulsive elements, and actuation of mechanisms such as separation devices, cutters, pin pullers, or isolation values. The Initiator takes an electrical input

Reducing Cost, Minimizing Waste DescriptionDescription EBAD has designed and set up an automated Reactive Armor LAP facility to support reactive armor programs. EBAD designed the module assembly and packaging cells for optimum production needs.  This allows EBAD to reduce work in process, reducing the cost of manufacturing the product, and minimizing waste. The process steps

Twice the charge. Double the precision. Product DescriptionProduct Description Tandem Warhead Delay Detonating cord technology is at the heart of these devices in order to insert a prescribed delay between the Safe and Arm Device and the warhead. These are primarily used in an initiation system to introduce a specific time delay into the warhead

Initiating pyrotechnic material in a controlled, precise manner DescriptionDescription Thermally Initiated Venting System (TIVS) Safety is at the core of EBAD’s Thermally Initiated Venting System (TIVS) by initiating pyrotechnic material in a controlled, precise manner. EBAD’s TIVS is a passive (non-electrical) system composed of three subassemblies; Thermal Sensors (SCO & FCO), an Sensor Enabled Acceleration

Providing solid rocket motor ignition Product DescriptionProduct Description Thru-Bulkhead Initiator (TBI) EBAD is a leader in providing Thru-Bulkhead Initiators (TBI) used in missiles, launch vehicles, and other aerospace and defense platforms for the ignition of solid rocket motors. TBIs are designed to provide solid rocket motor ignition while maintaining a pressure seal to prevent the

Perfect timing. Product DescriptionProduct Description Most commonly used in aircraft egress systems or for delayed warheads where penetrating a target prior to detonation is vital, the Time Delay Assembly is composed of a percussion primer, piezo power source, electronics and an initiator enclosed in a stainless steel housing. This product replaces conventional pyrotechnic time delays.

Sever High Strength Stainless Steel Cables DescriptionAdvantagesDescription The EBAD TiNi™ Cable Cutter uses powerful Bellville springs in conjunction with a specially designed blade and anvil to sever high strength Stainless Steel cables. This is an effective means to release payloads in emergency applications such as Search & Rescue. As with all EBAD TiNi™ products, it

Operable at Pressures up to 10,000 psi DescriptionAdvantagesDescription The EBAD TiNi™ Cryogenic Valve uses a high force piston that is operable at pressures up to 10,000 psi. This may be configured in either a “Normally Open” or “Normally Closed” embodiment. The sealing mechanism is designed to operate with both gas or liquid at temperatures down

High Load Holding Capability and Fast Actuation Time DescriptionAdvantagesDescription The EBAD TiNi™ Ejector Release Mechanism (ERM) is a uniquely simple and effective device which offers both high load holding capability and fast actuation time. The Actuator “Coupler” acts as a detachable Nut and may be used to support and release loads up to 4000 lbf.

Developed Specifically for “New Space” Applications DescriptionAdvantagesDescription The EBAD TiNi™ Flat Pack was developed specifically for “New Space” applications such as hold down and release of solar arrays for cubesats, deployable flexible antennas and launch locks. It is small in size, fast acting, and a cost effective way to support and release preloads up to

Simple and Effective DescriptionAdvantagesLaunch LocksDescription The EBAD TiNi™ Frangibolt® actuator is a simple and effective way to support and release loads up to 20,000 lbf. The principle of operation is simple: A Shape Memory Alloy (SMA) cylinder elongates to fracture a bolt or stud thereby achieving separation of two or more components. Standard Fastener sizes

Capable of Supporting Pressures Up to 10,000 psi DescriptionAdvantagesDescription The EBAD TiNi™ FrangiValve is a “Normally Closed” isolation valve that is capable of supporting pressures up to 10,000 psi. It is hermetically sealed using an all stainless steel valve body with a variety of orifice sizes. Actuation is achieved by using a Frangibolt® Actuator to

A Simple Means to Open High Pressure Cylinders DescriptionAdvantagesDescription The EBAD Gas Cylinder Penetrator (GCP) is a simple means to open high pressure cylinders for a variety of applications ranging from venting to emergency inflation to release of breathing air. The Actuator is fully resettable and uses the same mechanism as our high reliability release

Developed Specifically for “New Space” Applications DescriptionAdvantagesDescription The EBAD TiNi™Micro Latch was developed specifically for “New Space” applications such as hold down and release of Cubesats. It is small in size, fast acting, and a cost effective way to support and release preloads up to 50 lbf. /wp-content/uploads/2019/09/Micro-Latch-ML50_Render30slow_04-web.mp4 Advantages NEA® (Non-Explosive Actuators) – As with

Small, Simple and Powerful DescriptionAdvantagesDescription The EBAD TiNi™ Mini Frangibolt® Actuator is based on a #4 size screw and we believe is the smallest, simplest, and most powerful Actuator (considering its size) available in the world today. Once again, the enabling technology is our SCSMA material which provides 3x the stroke of commercially available SMAs.

Fast Acting for Many Aerospace Applications DescriptionAdvantagesLaunch LocksDescription The EBAD TiNi™ Pin Puller is fast acting and suitable for a variety of Aerospace applications. Pin retraction is achieved by coupling the recovery characteristics of Shape Memory Alloys with a patented trigger mechanism. Pin Puller pull force ranges from 5 to 1000 lbf with five standard

Narrow body diameter, long pin stroke The EBAD TiNi™ Pinpusher is yet another derivative of our Pinpuller technology. The embodiment shown has a relatively narrow body diameter and long Pin stroke. It also incorporates custom electrical switches which were designed to provide both a shut off function as well as telemetry. For pricing, or more

The EBAD TiNi™ Cut & Release Actuator was developed for a unique subsea application where a Fiber Optic cable assembly needed to be Cut & Released, on command. This was done by using two of our P50 Pinpullers in an orthogonal fashion to minimize mounting footprint. The custom developed interface included special adapters that provided

High Load Holding Capability and Fast Actuation Time DescriptionAdvantagesDescription The EBAD Subsea Ejector Release Mechanism (ERM) includes a Pressure Balanced and Oil Filled (PBOF) enclosure such that it can operate directly in Sea water at high pressure. It has been successfully used in many deep ocean applications to deploy critical instruments from various manned and

Release Deployables Remotely in Hostile Environments DescriptionAdvantagesDescription The EBAD TiNi™ Subsea Frangibolt® Actuator uses a polyurethane outer jacket and sealed cable such that they may be used directly in sea water and at very high pressure. As in space applications, the Frangibolt® Actuator offers a uniquely simple and effective means to release deployables remotely in

High Load Holding Capability and Fast Actuation Time DescriptionAdvantagesDescription EBAD Subsea Pin Pullers have been used in many oceanic projects. Typical applications include deployment of ballasts, buoys, cables, and other items from a wide array of AUVs. Much like our ERMs they include a Pressure Balanced and Oil Filled (PBOF) enclosure such that they can

Fast Acting for Many Aerospace Applications DescriptionAdvantagesDescription The EBAD TiNi™ Shackle Release was developed for Subsea rigging applications which require support and release of critical payloads remotely. The release function is achieved by using one of EBAD's subsea Frangibolt® Actuators coupled to powerful jaws which provide a leveraging mechanism much like a pair of pliers.

Perfect for a Variety of Fire Safety Applications DescriptionAdvantagesDescription The EBAD TiNi™  Thermal Trigger may be used in a variety of fire safety applications.  The enabling technology is the use of SCSMA (Single Crystal Shape Memory Alloy) material which makes it possible to set the trigger temperature at much higher values than is possible with

Quickly configure shapes and integrate explosives Product DescriptionFeaturesDownload Data SheetProduct Description Universal Breaching System (UBS) The Universal Breaching System (UBS) is a field adaptable breaching platform that allows end users the flexibility to quickly configure shapes and integrate explosives. The frame of the UBS is made from durable, blow molded sections that can be configured

Energetics for UAV/UGVs Platform-agnostic, remotely operated weaponization system Product DescriptionFeaturesDownload Data SheetProduct Description Unmanned Weaponization Package (UWP) EBAD’s Unmanned Weaponization Package (UWP - Pronounced U-Whip) is a platform-agnostic, remotely operated weaponization system. Attached via a Picatinny rail or mounting plate, the UWP enables any platform to carry an energetic effect to a location, safely arm,

DescriptionFeaturesDownload Data SheetDescription Warheads EBAD has designed, developed and produced a wide range of explosive and pyrotechnic products used for defense applications. EBAD maintains strong technical and operational expertise to perform new development and build-to-print warhead programs. EBAD’s core competency in handling and pressing explosive powders, pressed charge manufacture, cast-cure explosives, melt-cast explosives, and extrudable